Factory wholesale Cellulose Thickener - Medium-low temperature Accelerator – Taige
Factory wholesale Cellulose Thickener - Medium-low temperature Accelerator – Taige Detail:
Medium-low temperature Accelerator XBA-402S
Introduction
XBA-402S is an accelerator and benefited to cement strength development
XBA-402S can effectively shorten the thickening time of cement slurry.
XBA-402S can increase set cement’s early strength and shorten WOC(wait of cement) effectively.
XBA-402S could be used through wet or dry mixing.
Basic performance
|
Product |
Appearance |
Dosage(BWOC) |
|
XBA-402S |
Gray or off-white powder |
2~6% |
Slurry performance
|
Item |
Experimental condition |
Technical indicator |
|
|
Initial consistency, Bc |
32℃，8.3MPa，17min |
≤30 |
|
|
Rate of thickening time (Ratio of additive added and non-added) |
≤0.5 |
||
|
6h compressive strength，MPa |
39℃，0.1MPa |
≥4.0 |
|
|
Rate of 24h compressive strength (Ratio of additive added and non-added) |
≥1.0 |
||
|
Slurry composition |
API class G(HSR) 800g，XBA-402S 24g(3%)，fresh water，defoamer 1.2g (0.15%). Slurry density: 1.90±0.02g/cm3（adjusted by adding fresh water）。 | ||
Packaging and Storage
Packaging: XBA-402S is packed with 25kg bag, or according to user requirements.
Storage: The packed products should be saved in a dry and ventilated place, avoid rain, moisture, exposure and heat.
Product detail pictures:
Related Product Guide:
CNW | Cement Liquid Additives
Aubin | Oil Field Cementing Additives
continue to enhance, to be certain solution top quality in line with market and buyer standard requirements. Our corporation has a excellent assurance program are actually established for Factory wholesale Cellulose Thickener - Medium-low temperature Accelerator – Taige, The product will supply to all over the world, such as: Sheffield , Rome , Ghana , Customer satisfaction is our first goal. Our mission is to pursue the superlative quality, making continual progress. We sincerely welcome you to make progress hand in hand with us, and construct a prosperous future together.
By Cora
from Pretoria
- 2015.12.10 19:03
We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
By Lorraine
from Russia
- 2015.09.21 11:01
