Factory directly supply Beauty Skin Care Sets - Medium-low temperature Accelerator – Taige
Factory directly supply Beauty Skin Care Sets - Medium-low temperature Accelerator – Taige Detail:
Medium-low temperature Accelerator XBA-402S
Introduction
XBA-402S is an accelerator and benefited to cement strength development
XBA-402S can effectively shorten the thickening time of cement slurry.
XBA-402S can increase set cement’s early strength and shorten WOC(wait of cement) effectively.
XBA-402S could be used through wet or dry mixing.
Basic performance
|
Product |
Appearance |
Dosage(BWOC) |
|
XBA-402S |
Gray or off-white powder |
2~6% |
Slurry performance
|
Item |
Experimental condition |
Technical indicator |
|
|
Initial consistency, Bc |
32℃，8.3MPa，17min |
≤30 |
|
|
Rate of thickening time (Ratio of additive added and non-added) |
≤0.5 |
||
|
6h compressive strength，MPa |
39℃，0.1MPa |
≥4.0 |
|
|
Rate of 24h compressive strength (Ratio of additive added and non-added) |
≥1.0 |
||
|
Slurry composition |
API class G(HSR) 800g，XBA-402S 24g(3%)，fresh water，defoamer 1.2g (0.15%). Slurry density: 1.90±0.02g/cm3（adjusted by adding fresh water）。 | ||
Packaging and Storage
Packaging: XBA-402S is packed with 25kg bag, or according to user requirements.
Storage: The packed products should be saved in a dry and ventilated place, avoid rain, moisture, exposure and heat.
Product detail pictures:
Related Product Guide:
Mixing and Dust Reduction in a Horizontal Plow Mixer | Oil Field Cementing Additives
Global Grinding Aids Market Value Share, Supply Demand, share and Value Chain 2018-2028 | Organic Chemicals Additives
In the past few years, our company absorbed and digested advanced technologies both at home and abroad. Meanwhile, our company staffs a team of experts devoted to the development of Factory directly supply Beauty Skin Care Sets - Medium-low temperature Accelerator – Taige, The product will supply to all over the world, such as: Uganda , Russia , Kazakhstan , Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements. We are looking forward to cooperating with friends from all over the world.
By Jamie
from Liverpool
- 2016.06.22 12:49
This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
By Zoe
from Hungary
- 2016.10.27 12:12
