Factory Outlets Slurry Abrasion - Fluid Loss Control Medium-low Temperature – Taige

Short Description:

Medium-low temperature fluid loss agent XBA-203SIntroduction XBA-203S is a compound power fluid loss agent. XBA-203S’ applicable temperature is 0~90℃(BHCT). XBA-203S is not retarded and benefited to cement strength development. XBA-203S isn’t resistant to salt, not suitable for brine system. XBA-203S has a certain effect in viscosity and some dispersant may be added in cement slurry. XBA-203S only can be used through dry mixing.Basic performanceProductAppearanceDosag...

Send email to us Download as PDF

Product Detail

Product Tags

Feedback (2)

We pursue the administration tenet of "Quality is exceptional, Assistance is supreme, Reputation is first", and will sincerely create and share success with all clients for Thickening Additive , Organic Chemicals Additives , Slurry Flow Tester , We also ensure that your selection will be crafted with the highest quality and reliability. Please feel free to contact us for further information.

Factory Outlets Slurry Abrasion - Fluid Loss Control Medium-low Temperature – Taige Detail:

Medium-low temperature fluid loss agent XBA-203S

Introduction

XBA-203S is a compound power fluid loss agent.

XBA-203S’ applicable temperature is 0~90℃(BHCT).

XBA-203S is not retarded and benefited to cement strength development.

XBA-203S isn’t resistant to salt, not suitable for brine system.

XBA-203S has a certain effect in viscosity and some dispersant may be added in cement slurry.

XBA-203S only can be used through dry mixing.

Basic performance

Product	Appearance	Dosage
		Freshwater system	Brine system
XBA-203S	Gray powder	0.8~2.0%	Inapplicable

Slurry performance

Item		Experimental condition	Technical indicator
Fluid loss, mL		80℃，6.9MPa	≤50
Others	Initial consistency, Bc	80℃，46.5MPa，45min	≤30
	40-100Bc thickening transition time, min		≤40
	Thickening time, min		≥70
	Free fluid, %	80℃，0.1MPa	≤1.4
	24h compressive strength, MPa	102℃，20.7MPa	≥14
Slurry composition	API class G(HSR) 800g , fresh water , XBA-202S 12g(1.5%), XBA-101L 8g(1.0%), defoamer 1.2g（0.15%）.Slurry density: 1.90±0.02g/cm3(adjusted by adding fresh water).

Packaging and Storage

Packaging: XBA-203S is packed with 25kg bag, or according to user requirements.

Storage: The packed products should be saved in a dry and ventilated place, avoid rain, moisture, exposure and heat.

Product detail pictures:

We have been experienced manufacturer. Wining the majority of the crucial certifications of its market for Factory Outlets Slurry Abrasion - Fluid Loss Control Medium-low Temperature – Taige, The product will supply to all over the world, such as: Seattle , US , Poland , Due to the stability of our products, timely supply and our sincere service, we are able to sell our products not only over the domestic market, but also exported to countries and regions, including the Middle East, Asia, Europe and other countries and regions. At the same time, we also undertake OEM and ODM orders. We will do our best to serve your company, and establish a successful and friendly cooperation with you.

High Speed Mixer High Quality Products