2017 Latest Design Alumina Ceramic Liner - Fluid Loss Control High Temperature Anti-saline – Taige
2017 Latest Design Alumina Ceramic Liner - Fluid Loss Control High Temperature Anti-saline – Taige Detail:
High temperature fluid loss agent XBA-203L
Introduction
XBA-203L is a high temperature fluid loss agent.
XBA-203L’s applicable temperature is 60~150℃(BHCT).
XBA-203L is resistant to salt and applicable to saturated brine.
XBA-203L has a retarding effect and is suitable for high temperature and deep well cementing.
XBA-203L slurry system is stable and has good compatibility.
XBA-203L is liquid and only can be used through wet mixing.
XBA-203L’s dosage need to be adjusted according to temperature, salinity and cementing requirements.
Basic performance
|
Product |
Appearance |
Dosage(BWOC) |
|
|
Freshwater system |
Brine system |
||
|
XBA-203L |
colorless or light yellow liquid |
3~6% |
4~8% |
Slurry performance
|
Item |
Experimental condition |
Technical indicator |
|
|
Fluid loss, mL |
Freshwater system |
120℃，6.9MPa |
≤50 |
|
Brine system |
≤150 |
||
|
Others |
Initial consistency, Bc |
120℃, 73.9MPa,61min |
≤30 |
|
40-100Bc thickening transition time, min |
≤40 |
||
|
Thickening time, min |
≥120 |
||
|
Free fluid, % |
80℃，0.1MPa |
≤1.4 |
|
|
24h compressive strength, MPa |
144℃，20.7MPa |
≥14 |
|
|
Slurry composition |
Fresh water system：API class G(HSR) 600g , silica flour 210g(140-200 mesh, 35%), fresh water, XBA-201L 30g(5%), XBA-105L 6g(1%), defoamer 1.2g(0.2%). Slurry density: 1.90±0.02g/cm3(adjusted by adding fresh water). Brine system：API class G(HSR) 600g, silica flour 210g(140-200 mesh, 35%), 18% brine , XBA-203L 36g(6%), XBA-105L 6 g(1%), defoamer 1.2g(0.2%). Slurry density: 1.90±0.02g/cm3(adjusted by adding 36% brine). |
||
Packaging and Storage
Packaging: XBA-203L is packed with 25kg barrel, or according to user requirements.
Storage: The packed products should be saved in a cool and ventilated place, avoid exposure and heat.
Product detail pictures:
Related Product Guide:
Stupidity caught on celluloid: The Beautiful Truth | Cement Liquid Additives
Quality inspection of oil well cement and additives
Which has a positive and progressive attitude to customer's desire, our corporation constantly improves our merchandise quality to satisfy the desires of consumers and further focuses on safety, reliability, environmental demands, and innovation of 2017 Latest Design Alumina Ceramic Liner - Fluid Loss Control High Temperature Anti-saline – Taige, The product will supply to all over the world, such as: Montreal , Hongkong , Greece , In order to make more people know our products and to enlarge our market, we have devoted a lot of attention to technical innovations and improvement, as well as replacement of equipment. Last but not the least, we also pay more attention to training our managerial personnel, technicians and workers in planned way.
By Amy
from Nigeria
- 2016.11.29 11:09
This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
By Sharon
from Chile
- 2015.02.08 16:45
