100% Original Drilling Fuilds - Fluid Loss Control Medium-low Temperature – Taige
100% Original Drilling Fuilds - Fluid Loss Control Medium-low Temperature – Taige Detail:
Medium-low temperature fluid loss agent XBA-203S
Introduction
XBA-203S is a compound power fluid loss agent.
XBA-203S’ applicable temperature is 0~90℃(BHCT).
XBA-203S is not retarded and benefited to cement strength development.
XBA-203S isn’t resistant to salt, not suitable for brine system.
XBA-203S has a certain effect in viscosity and some dispersant may be added in cement slurry.
XBA-203S only can be used through dry mixing.
Basic performance
|
Product |
Appearance |
Dosage |
|
|
Freshwater system |
Brine system |
||
|
XBA-203S |
Gray powder |
0.8~2.0% |
Inapplicable |
Slurry performance
|
Item |
Experimental condition |
Technical indicator |
|
|
Fluid loss, mL |
80℃，6.9MPa |
≤50 |
|
|
Others |
Initial consistency, Bc |
80℃，46.5MPa，45min |
≤30 |
|
40-100Bc thickening transition time, min |
≤40 |
||
|
Thickening time, min |
≥70 |
||
|
Free fluid, % |
80℃，0.1MPa |
≤1.4 |
|
|
24h compressive strength, MPa |
102℃，20.7MPa |
≥14 |
|
|
Slurry composition |
API class G(HSR) 800g , fresh water , XBA-202S 12g(1.5%), XBA-101L 8g(1.0%), defoamer 1.2g（0.15%）.Slurry density: 1.90±0.02g/cm3(adjusted by adding fresh water). | ||
Packaging and Storage
Packaging: XBA-203S is packed with 25kg bag, or according to user requirements.
Storage: The packed products should be saved in a dry and ventilated place, avoid rain, moisture, exposure and heat.
Product detail pictures:
Related Product Guide:
This study compared methods for measuring static gel strength development
Succeed in the Pre-qualified vendor of ADNOC( Abu Dhabi National Oil Company)
We normally think and practice corresponding on the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and also the living for 100% Original Drilling Fuilds - Fluid Loss Control Medium-low Temperature – Taige, The product will supply to all over the world, such as: Auckland , belarus , Seychelles , Our market share of our products and solutions has greatly increased yearly. If you are interested in any of our products or would like to discuss a custom order, make sure you feel free to contact us. We've been looking forward to forming successful business relationships with new clients around the world in the near future. We've been looking forward to your inquiry and order.
By Beatrice
from Belarus
- 2016.09.09 10:18
The company comply with the contract strict, a very reputable manufacturers, worthy a long-term cooperation.
By Deborah
from Moldova
- 2015.12.10 19:03
