Wholesale Dealers of Cartomizer Low Ohm Meter - Medium-low temperature Accelerator – Taige
Wholesale Dealers of Cartomizer Low Ohm Meter - Medium-low temperature Accelerator – Taige Detail:
Medium-low temperature Accelerator XBA-402S
Introduction
XBA-402S is an accelerator and benefited to cement strength development
XBA-402S can effectively shorten the thickening time of cement slurry.
XBA-402S can increase set cement’s early strength and shorten WOC(wait of cement) effectively.
XBA-402S could be used through wet or dry mixing.
Basic performance
|
Product |
Appearance |
Dosage(BWOC) |
|
XBA-402S |
Gray or off-white powder |
2~6% |
Slurry performance
|
Item |
Experimental condition |
Technical indicator |
|
|
Initial consistency, Bc |
32℃，8.3MPa，17min |
≤30 |
|
|
Rate of thickening time (Ratio of additive added and non-added) |
≤0.5 |
||
|
6h compressive strength，MPa |
39℃，0.1MPa |
≥4.0 |
|
|
Rate of 24h compressive strength (Ratio of additive added and non-added) |
≥1.0 |
||
|
Slurry composition |
API class G(HSR) 800g，XBA-402S 24g(3%)，fresh water，defoamer 1.2g (0.15%). Slurry density: 1.90±0.02g/cm3（adjusted by adding fresh water）。 | ||
Packaging and Storage
Packaging: XBA-402S is packed with 25kg bag, or according to user requirements.
Storage: The packed products should be saved in a dry and ventilated place, avoid rain, moisture, exposure and heat.
Product detail pictures:
Related Product Guide:
What Everybody Ought to Know About Food Additives
Independent Cementing and drilling Test Lab
We know that we only thrive if we will guarantee our combined cost competiveness and high-quality advantageous at the same time for Wholesale Dealers of Cartomizer Low Ohm Meter - Medium-low temperature Accelerator – Taige, The product will supply to all over the world, such as: South Africa , Florida , Lesotho , So far our products have been exported to east Europe, the Middle East, Southeast, Africa and South America etc. We have 13years professional sales and purchase in Isuzu parts at home and abroad and the ownership of the modernized electronic Isuzu parts checking systems. We honor our core principal of Honesty in business, priority in service and will do our best to offer our customers with high quality products and excellent service.
By Eric
from Sydney
- 2016.11.12 12:31
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Edward
from USA
- 2015.12.25 12:43
