Special Design for Hpmc For Paint - Fluid Loss Control High Temperature Anti-saline – Taige
Special Design for Hpmc For Paint - Fluid Loss Control High Temperature Anti-saline – Taige Detail:
High temperature fluid loss agent XBA-203L
Introduction
XBA-203L is a high temperature fluid loss agent.
XBA-203L’s applicable temperature is 60~150℃(BHCT).
XBA-203L is resistant to salt and applicable to saturated brine.
XBA-203L has a retarding effect and is suitable for high temperature and deep well cementing.
XBA-203L slurry system is stable and has good compatibility.
XBA-203L is liquid and only can be used through wet mixing.
XBA-203L’s dosage need to be adjusted according to temperature, salinity and cementing requirements.
Basic performance
|
Product |
Appearance |
Dosage(BWOC) |
|
|
Freshwater system |
Brine system |
||
|
XBA-203L |
colorless or light yellow liquid |
3~6% |
4~8% |
Slurry performance
|
Item |
Experimental condition |
Technical indicator |
|
|
Fluid loss, mL |
Freshwater system |
120℃，6.9MPa |
≤50 |
|
Brine system |
≤150 |
||
|
Others |
Initial consistency, Bc |
120℃, 73.9MPa,61min |
≤30 |
|
40-100Bc thickening transition time, min |
≤40 |
||
|
Thickening time, min |
≥120 |
||
|
Free fluid, % |
80℃，0.1MPa |
≤1.4 |
|
|
24h compressive strength, MPa |
144℃，20.7MPa |
≥14 |
|
|
Slurry composition |
Fresh water system：API class G(HSR) 600g , silica flour 210g(140-200 mesh, 35%), fresh water, XBA-201L 30g(5%), XBA-105L 6g(1%), defoamer 1.2g(0.2%). Slurry density: 1.90±0.02g/cm3(adjusted by adding fresh water). Brine system：API class G(HSR) 600g, silica flour 210g(140-200 mesh, 35%), 18% brine , XBA-203L 36g(6%), XBA-105L 6 g(1%), defoamer 1.2g(0.2%). Slurry density: 1.90±0.02g/cm3(adjusted by adding 36% brine). |
||
Packaging and Storage
Packaging: XBA-203L is packed with 25kg barrel, or according to user requirements.
Storage: The packed products should be saved in a cool and ventilated place, avoid exposure and heat.
Product detail pictures:
Related Product Guide:
Smart technology for synchronized 3D printing of concrete — ScienceDaily | Organic Chemicals Additives
ADIPEC 2024- Cementing test equipment and chemicals
With our leading technology as well as our spirit of innovation,mutual cooperation, benefits and development, we will build a prosperous future together with your esteemed company for Special Design for Hpmc For Paint - Fluid Loss Control High Temperature Anti-saline – Taige, The product will supply to all over the world, such as: Zimbabwe , Mexico , Jersey , We put the product quality and customer's benefits to the first place. Our experienced salesmen supply prompt and efficient service. Quality control group make sure the best quality. We believe quality comes from detail. If you have demand, allow us to work together to get success.
By Pamela
from United Arab Emirates
- 2015.07.12 12:19
The customer service reprersentative explained very detailed, service attitude is very good, reply is very timely and comprehensive, a happy communication! We hope to have a opportunity to cooperate.
By Ingrid
from Nepal
- 2015.10.01 14:14
