Short Lead Time for High Speed Paint Mixer - Fluid Loss Control Medium-low Temperature – Taige

Short Description:

Medium-low temperature fluid loss agent XBA-203SIntroduction XBA-203S is a compound power fluid loss agent. XBA-203S’ applicable temperature is 0~90℃(BHCT). XBA-203S is not retarded and benefited to cement strength development. XBA-203S isn’t resistant to salt, not suitable for brine system. XBA-203S has a certain effect in viscosity and some dispersant may be added in cement slurry. XBA-203S only can be used through dry mixing.Basic performanceProductAppearanceDosag...

Send email to us Download as PDF

Product Detail

Product Tags

Feedback (2)

We pursue the administration tenet of "Quality is exceptional, Assistance is supreme, Reputation is first", and will sincerely create and share success with all clients for Data Acquisition System , Pressurized Consistometer , Laboratory Viscometer , Wanting on the long run, a protracted way to go, continually striving to become the all team with full enthusiasm, one hundred times the confidence and put our company created a beautiful environment, advanced merchandise, good quality first-class modern business and get the job done hard!

Short Lead Time for High Speed Paint Mixer - Fluid Loss Control Medium-low Temperature – Taige Detail:

Medium-low temperature fluid loss agent XBA-203S

Introduction

XBA-203S is a compound power fluid loss agent.

XBA-203S’ applicable temperature is 0~90℃(BHCT).

XBA-203S is not retarded and benefited to cement strength development.

XBA-203S isn’t resistant to salt, not suitable for brine system.

XBA-203S has a certain effect in viscosity and some dispersant may be added in cement slurry.

XBA-203S only can be used through dry mixing.

Basic performance

Product	Appearance	Dosage
		Freshwater system	Brine system
XBA-203S	Gray powder	0.8~2.0%	Inapplicable

Slurry performance

Item		Experimental condition	Technical indicator
Fluid loss, mL		80℃，6.9MPa	≤50
Others	Initial consistency, Bc	80℃，46.5MPa，45min	≤30
	40-100Bc thickening transition time, min		≤40
	Thickening time, min		≥70
	Free fluid, %	80℃，0.1MPa	≤1.4
	24h compressive strength, MPa	102℃，20.7MPa	≥14
Slurry composition	API class G(HSR) 800g , fresh water , XBA-202S 12g(1.5%), XBA-101L 8g(1.0%), defoamer 1.2g（0.15%）.Slurry density: 1.90±0.02g/cm3(adjusted by adding fresh water).

Packaging and Storage

Packaging: XBA-203S is packed with 25kg bag, or according to user requirements.

Storage: The packed products should be saved in a dry and ventilated place, avoid rain, moisture, exposure and heat.

Product detail pictures:

Our merchandise are commonly recognized and reliable by customers and can meet constantly developing economic and social desires for Short Lead Time for High Speed Paint Mixer - Fluid Loss Control Medium-low Temperature – Taige, The product will supply to all over the world, such as: Finland , Bangalore , New Orleans , Our mission is "Provide Products with Reliable Quality and Reasonable Prices". We welcome customers from every corner of the world to contact us for future business relationships and achieving mutual success!

Aging Cell Products Made in China