Renewable Design for Digital Hydraulic Machine - Medium-low temperature Accelerator – Taige
Renewable Design for Digital Hydraulic Machine - Medium-low temperature Accelerator – Taige Detail:
Medium-low temperature Accelerator XBA-402S
Introduction
XBA-402S is an accelerator and benefited to cement strength development
XBA-402S can effectively shorten the thickening time of cement slurry.
XBA-402S can increase set cement’s early strength and shorten WOC(wait of cement) effectively.
XBA-402S could be used through wet or dry mixing.
Basic performance
|
Product |
Appearance |
Dosage(BWOC) |
|
XBA-402S |
Gray or off-white powder |
2~6% |
Slurry performance
|
Item |
Experimental condition |
Technical indicator |
|
|
Initial consistency, Bc |
32℃，8.3MPa，17min |
≤30 |
|
|
Rate of thickening time (Ratio of additive added and non-added) |
≤0.5 |
||
|
6h compressive strength，MPa |
39℃，0.1MPa |
≥4.0 |
|
|
Rate of 24h compressive strength (Ratio of additive added and non-added) |
≥1.0 |
||
|
Slurry composition |
API class G(HSR) 800g，XBA-402S 24g(3%)，fresh water，defoamer 1.2g (0.15%). Slurry density: 1.90±0.02g/cm3（adjusted by adding fresh water）。 | ||
Packaging and Storage
Packaging: XBA-402S is packed with 25kg bag, or according to user requirements.
Storage: The packed products should be saved in a dry and ventilated place, avoid rain, moisture, exposure and heat.
Product detail pictures:
Related Product Guide:
Stretchy Solar Cells: Finding the Goldilocks Zone Between Flexibility and Efficiency > ENGINEERING.com | Stirred Fluid Loss Cell
Shenyang Taige Oil Equipment : Oil & Gas Indonesia 2023, Great activity to be held in Jakarta
With this motto in mind, we have turn out to be amongst probably the most technologically innovative, cost-efficient, and price-competitive manufacturers for Renewable Design for Digital Hydraulic Machine - Medium-low temperature Accelerator – Taige, The product will supply to all over the world, such as: Sudan , Uruguay , Hamburg , In the new century, we promote our enterprise spirit "United, diligent, high efficiency, innovation", and stick to our policy"basing on quality, be enterprising, striking for first class brand". We would take this golden opportunity to create bright future.
By Jack
from Somalia
- 2016.06.22 12:49
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Olivia
from San Diego
- 2016.10.27 12:12
