Reasonable price for Drilling Cementing Fluid - Fluid Loss Control Medium-low Temperature – Taige

Short Description:

Medium-low temperature fluid loss agent XBA-203SIntroduction XBA-203S is a compound power fluid loss agent. XBA-203S’ applicable temperature is 0~90℃(BHCT). XBA-203S is not retarded and benefited to cement strength development. XBA-203S isn’t resistant to salt, not suitable for brine system. XBA-203S has a certain effect in viscosity and some dispersant may be added in cement slurry. XBA-203S only can be used through dry mixing.Basic performanceProductAppearanceDosag...

Send email to us Download as PDF

Product Detail

Product Tags

Feedback (2)

Often customer-oriented, and it's our ultimate target to become not only probably the most reputable, trustable and honest provider, but also the partner for our customers for Drilling Fluid Testing , Stirred Fluid Loss , Basic Testing Instruments For Slurry , To better expand market, we sincerely invite ambitious individuals and companies to join as an agent.

Reasonable price for Drilling Cementing Fluid - Fluid Loss Control Medium-low Temperature – Taige Detail:

Medium-low temperature fluid loss agent XBA-203S

Introduction

XBA-203S is a compound power fluid loss agent.

XBA-203S’ applicable temperature is 0~90℃(BHCT).

XBA-203S is not retarded and benefited to cement strength development.

XBA-203S isn’t resistant to salt, not suitable for brine system.

XBA-203S has a certain effect in viscosity and some dispersant may be added in cement slurry.

XBA-203S only can be used through dry mixing.

Basic performance

Product	Appearance	Dosage
		Freshwater system	Brine system
XBA-203S	Gray powder	0.8~2.0%	Inapplicable

Slurry performance

Item		Experimental condition	Technical indicator
Fluid loss, mL		80℃，6.9MPa	≤50
Others	Initial consistency, Bc	80℃，46.5MPa，45min	≤30
	40-100Bc thickening transition time, min		≤40
	Thickening time, min		≥70
	Free fluid, %	80℃，0.1MPa	≤1.4
	24h compressive strength, MPa	102℃，20.7MPa	≥14
Slurry composition	API class G(HSR) 800g , fresh water , XBA-202S 12g(1.5%), XBA-101L 8g(1.0%), defoamer 1.2g（0.15%）.Slurry density: 1.90±0.02g/cm3(adjusted by adding fresh water).

Packaging and Storage

Packaging: XBA-203S is packed with 25kg bag, or according to user requirements.

Storage: The packed products should be saved in a dry and ventilated place, avoid rain, moisture, exposure and heat.

Product detail pictures:

We persist with the principle of "quality 1st, assistance initially, continual improvement and innovation to meet the customers" for your management and "zero defect, zero complaints" as the standard objective. To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for Reasonable price for Drilling Cementing Fluid - Fluid Loss Control Medium-low Temperature – Taige, The product will supply to all over the world, such as: Hungary , Estonia , Sao Paulo , With the highest standards of product quality and service, our products have been exported to more than 25 countries like the USA, CANADA, GERMANY, FRANCE, UAE, Malaysia and so on.We are very pleased to serve customers from all over the world!

Bench-Top Consistometer Wholesaler Quotes/PriceList