Popular Design for Salt Resistance Reducer - Compound accelerator – Taige
Popular Design for Salt Resistance Reducer - Compound accelerator – Taige Detail:
Compound Accelerator XBA-403S
Introduction
XBA-403S is a compound power accelerator.
XBA-403S is applicable for medium-low temperature system.
XBA-403S can effectively shorten the thickening time of cement slurry.
XBA-403S can increase set cement’s early strength and shorten WOC(wait of cement) effectively.
XBA-403S could be used through wet or dry mixing.
Basic performance
|
Product |
Appearance |
Dosage(BWOC) |
|
XBA-403S |
Gray powder |
2~6% |
Slurry performance
|
Item |
Experimental condition |
Technical indicator |
|
|
Initial consistency, Bc |
32℃，8.3MPa，17min |
≤30 |
|
|
Rate of thickening time (Ratio of additive added and non-added) |
≤0.5 |
||
|
6h compressive strength，MPa |
39℃，0.1MPa |
≥4.0 |
|
|
Rate of 24h compressive strength (Ratio of additive added and non-added) |
≥1.0 |
||
|
Slurry composition |
API class G(HSR) 800g，XBA-403S 32g(4%)，fresh water，defoamer 1.2g (0.15%). Slurry density: 1.90±0.02g/cm3（adjusted by adding fresh water）。 | ||
Packaging and Storage
Packaging: XBA-403S is packed with 25kg bag, or according to user requirements.
Storage: The packed products should be saved in a dry and ventilated place, avoid rain, moisture, exposure and heat.
Product detail pictures:
Related Product Guide:
Chemical Additives Information
Contrasting JSR CORP/ADR (OTCMKTS:JSCPY) & LSB Industries (LXU) | Oil Field Cementing Additives
Assume full accountability to fulfill all demands of our purchasers; attain continual advancements by marketing the advancement of our clientele; grow to be the final permanent cooperative partner of purchasers and maximize the interests of purchasers for Popular Design for Salt Resistance Reducer - Compound accelerator – Taige, The product will supply to all over the world, such as: Albania , Amman, Manchester , We have a strict and complete quality control system, which ensures that each product can meet quality requirements of customers. Besides, all of our products have been strictly inspected before shipment.
By Ellen
from Brunei
- 2016.02.18 15:54
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Rae
from Melbourne
- 2015.12.11 14:13
