Popular Design for Ndj-1 Rotational Viscometer - Annulus-microfracture Gas-migration – Taige
Popular Design for Ndj-1 Rotational Viscometer - Annulus-microfracture Gas-migration – Taige Detail:
Annulus-microfracture Gas-migration Apparatus
Introduction
This apparatus is tested the effect of the adhesive force of cement annulus and cement annulus vs. outer side of oil tube and inner side of annular tube in the condition of simulating downhole change environment.
The instrument can stimulate the following environment change:
- the voltage change inside the oil tube
- the temperature change of the bottom pressure
- alternate change of the pressure at the top and the bottom of cement annular
- alternate change of the pressure of oil tube and ground
- the change of the compressing force for oil tube
- the change of the drawing force for oil tube
Configurations
- operation and control part
- curing part
- vessel
- data acquisition system

TG-5002
840*750*1700mm(1280kg)
Specifications
Outer diameter of inner tube: φ177.8mm
Inner diameter of outer tube: φ245mm
Pressure of inner tube: 0~70MPa (pressure controlled)
Pressure of outer tube: 0~70MPa (pressure controlled)
Pressure of air layer: 0~12MPa (pressure controlled)
Pressure of the top and the bottom of cement annular: 0~70MPa (pressure controlled)
Temperature range: 200℃ (temperature controlled)
Drawing force: 0~10000kg (force controlled)
Compressing force: 0~10000kg (force controlled)
Product detail pictures:

Related Product Guide:
Investec Asset Management North America Decreased Tim Participacoes Sa (TSU) Holding; SIKA AG ORDINARY SHARES (SKFOF) SI Increased By 26.7% | Organic Chemicals Additives
Shenyang Taige Oil Equipment welcomes you to visit ADIPEC 2026
Our corporation puts emphasis about the administration, the introduction of talented staff, plus the construction of team building, attempting hard to improve the quality and liability consciousness of team members. Our organization successfully attained IS9001 Certification and European CE Certification of Popular Design for Ndj-1 Rotational Viscometer - Annulus-microfracture Gas-migration – Taige, The product will supply to all over the world, such as: Karachi , Macedonia , Turkmenistan , We always insist on the management tenet of "Quality is first, Technology is basis, Honesty and Innovation".We are able to develop new products continuously to a higher level to satisfy different needs of customers.
The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.



