OEM/ODM Supplier Price Silica Gel - Retarder Medium-low Temperature – Taige
OEM/ODM Supplier Price Silica Gel - Retarder Medium-low Temperature – Taige Detail:
Medium-low temperature retarder XBA-103L
Introduction
XBA-103L is a medium-low temperature retarder.
XBA-103L’s applicable temperature is 30~90℃(BHCT).
XBA-103L is applicable to brine system.
XBA-103L’s recommended dosage is 0.2~3.0%(BWOC).
XBA-103L is liquid and used through wet mixing.
XBA-103L’s dosage is adjustable according to cementing requirements.
Basic performance
|
Product |
Appearance |
Dosage(BWOC) |
|
XBA-207L |
colorless or light red liquid |
0.2~3.0% |
Slurry performance
|
Item |
Experimental condition |
Technical indicator |
|
|
Thickening time,min |
80℃,46.5MPa,45min |
≥130 |
|
|
Initial consistency, Bc |
≤30 |
||
|
40-100Bc thickening transition time, min |
≤40 |
||
|
Free fluid, % |
80℃,0.01MPa |
≤1.4 |
|
|
24h compressive strength, MPa |
102℃,21MPa |
≥14 |
|
|
Slurry composition |
API class G (HSR)800g,fresh water,XBA-103L 4g(0.5%),defoamer 1.2g(0.15%);Slurry density: 1.90±0.02g/cm3(adjusted by adding fresh water). | ||
|
Note |
The thickening time is adjustable as the different dosage of XBA-103L. | ||
Packaging and Storage
Packaging: XBA-103L is packed with 25kg barrel, or according to user requirements.
Storage: The packed products should be saved in a cool and ventilated place, avoid exposure and heat.
Product detail pictures:


Related Product Guide:
Shenyang Taige Oil Equipment will attend 48th IPA Convention&Exhibition
The largest organ in the body may have just been discovered â and it could reshape our understanding of human anatomy | Stirred Fluid Loss Cell
Every single member from our large efficiency profits team values customers' requirements and organization communication for OEM/ODM Supplier Price Silica Gel - Retarder Medium-low Temperature – Taige, The product will supply to all over the world, such as: Dominica , Guinea , Cancun , We have now a good reputation for stable quality goods, well received by customers at home and abroad. Our company would be guided by the idea of "Standing in Domestic Markets, Walking into International Markets". We sincerely hope that we could do business with car manufacturers, auto part buyers and the majority of colleagues both at home and abroad. We expect sincere cooperation and common development!
Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!



