New Fashion Design for Dry Chemical Powder - Medium-low temperature Accelerator – Taige
New Fashion Design for Dry Chemical Powder - Medium-low temperature Accelerator – Taige Detail:
Medium-low temperature Accelerator XBA-402S
Introduction
XBA-402S is an accelerator and benefited to cement strength development
XBA-402S can effectively shorten the thickening time of cement slurry.
XBA-402S can increase set cement’s early strength and shorten WOC(wait of cement) effectively.
XBA-402S could be used through wet or dry mixing.
Basic performance
|
Product |
Appearance |
Dosage(BWOC) |
|
XBA-402S |
Gray or off-white powder |
2~6% |
Slurry performance
|
Item |
Experimental condition |
Technical indicator |
|
|
Initial consistency, Bc |
32℃，8.3MPa，17min |
≤30 |
|
|
Rate of thickening time (Ratio of additive added and non-added) |
≤0.5 |
||
|
6h compressive strength，MPa |
39℃，0.1MPa |
≥4.0 |
|
|
Rate of 24h compressive strength (Ratio of additive added and non-added) |
≥1.0 |
||
|
Slurry composition |
API class G(HSR) 800g，XBA-402S 24g(3%)，fresh water，defoamer 1.2g (0.15%). Slurry density: 1.90±0.02g/cm3（adjusted by adding fresh water）。 | ||
Packaging and Storage
Packaging: XBA-402S is packed with 25kg bag, or according to user requirements.
Storage: The packed products should be saved in a dry and ventilated place, avoid rain, moisture, exposure and heat.
Product detail pictures:
Related Product Guide:
Discovered: Optimal Magnetic Fields for Suppressing Instabilities in Tokamaks | Concrete Retardant Additives
7 Artificial Flavors Linked to Cancer Banned By FDA | Stirred Fluid Loss Cell
We aim to find out high quality disfigurement in the generation and provide the most effective services to domestic and abroad clients wholeheartedly for New Fashion Design for Dry Chemical Powder - Medium-low temperature Accelerator – Taige, The product will supply to all over the world, such as: Seychelles , Ukraine , Turin , We strongly believe that technology and service is our base today and quality will create our reliable walls of future. Only we've got better and better quality , could we achieve our customers and ourselves, too. Welcome customers all over the word to contact us for getting further business and reliable relationships. We have been always here working for your demands whenever you require.
By Teresa
from South Africa
- 2015.09.16 11:31
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Ivy
from Chile
- 2015.09.21 11:44
