Manufacturing Companies for Guangzhou Electronics - Fluid Loss Control Medium-low Temperature – Taige
Manufacturing Companies for Guangzhou Electronics - Fluid Loss Control Medium-low Temperature – Taige Detail:
Medium-low temperature fluid loss agent XBA-203S
Introduction
XBA-203S is a compound power fluid loss agent.
XBA-203S’ applicable temperature is 0~90℃(BHCT).
XBA-203S is not retarded and benefited to cement strength development.
XBA-203S isn’t resistant to salt, not suitable for brine system.
XBA-203S has a certain effect in viscosity and some dispersant may be added in cement slurry.
XBA-203S only can be used through dry mixing.
Basic performance
|
Product |
Appearance |
Dosage |
|
|
Freshwater system |
Brine system |
||
|
XBA-203S |
Gray powder |
0.8~2.0% |
Inapplicable |
Slurry performance
|
Item |
Experimental condition |
Technical indicator |
|
|
Fluid loss, mL |
80℃，6.9MPa |
≤50 |
|
|
Others |
Initial consistency, Bc |
80℃，46.5MPa，45min |
≤30 |
|
40-100Bc thickening transition time, min |
≤40 |
||
|
Thickening time, min |
≥70 |
||
|
Free fluid, % |
80℃，0.1MPa |
≤1.4 |
|
|
24h compressive strength, MPa |
102℃，20.7MPa |
≥14 |
|
|
Slurry composition |
API class G(HSR) 800g , fresh water , XBA-202S 12g(1.5%), XBA-101L 8g(1.0%), defoamer 1.2g（0.15%）.Slurry density: 1.90±0.02g/cm3(adjusted by adding fresh water). | ||
Packaging and Storage
Packaging: XBA-203S is packed with 25kg bag, or according to user requirements.
Storage: The packed products should be saved in a dry and ventilated place, avoid rain, moisture, exposure and heat.
Product detail pictures:
Related Product Guide:
Stretchy Solar Cells: Finding the Goldilocks Zone Between Flexibility and Efficiency > ENGINEERING.com | Stirred Fluid Loss Cell
JPT Pulsed-Neutron Comparison of Open- and Casedhole Wells: An Alaskan Case Study | Cement Liquid Additives
The business keeps to the operation concept "scientific management, premium quality and efficiency primacy, customer supreme for Manufacturing Companies for Guangzhou Electronics - Fluid Loss Control Medium-low Temperature – Taige, The product will supply to all over the world, such as: Mali , Lisbon , Puerto Rico , Thus far, our item associated with printer dtg a4 may be shown in most foreign nations as well as urban centers, which are sought after simply by targeted traffic. We all highly imagine that now we have the full capacity to present you with contented merchandise. Desire to collect requests of your stuff and produce the long-term co-operation partnership. We very seriously promise:Csame top quality, better price; exact same selling price, higher quality.
By Gloria
from Macedonia
- 2015.09.08 17:09
We are old friends, the company's product quality has been always very good and this time the price is also very cheap.
By Elvira
from Mali
- 2016.03.08 14:45
