Manufacturer for Thermal Shock Test - Oil Well Cement Dispersant – Taige
Manufacturer for Thermal Shock Test - Oil Well Cement Dispersant – Taige Detail:
Oil well cement dispersant XBA-303
Introduction
XBA-303 has two types：XBA-303L (liquid ) and XBA-303S (solid);
XBA-303 could significantly reduce consistency，improve liquidity and rheological behavior of cement slurry.
XBA-303 has wide range of applicable temperature to meet the needs of high, medium and low temperature cementing requirements;
XBA-303 is resistant to salt and applicable to saturated brine.
XBA-303L only can be used through wet mixing.
XBA-303S could be used through wet or dry mixing.
XBA-303’s dosage need to be adjusted according to the performance requirements of cement slurry.
Basic performance
|
Product |
Appearance |
Dosage(BWOC) |
|
XBA-303L |
red liquid |
0.5~4% |
|
XBA-303S |
red powder |
0.2~2% |
Slurry performance
|
Item |
Experimental condition |
Technical indicator |
|
|
Rate of thickening time (Ratio of additive added and non-added) |
85℃，70.3MPa，44min |
1.0~2.0 |
|
|
Thickening linear |
正常 |
||
|
Rate of 24h compressive strength (Ratio of additive added and non-added) |
110℃，20.7MPa |
≥0.80 |
|
|
Rheological property |
rheological index n |
85℃，0.01MPa |
≥0.50 |
|
|
consistentcy coefficient k，Pa·sn |
≤0.70 |
|
|
Slurry composition |
API class G(HSR) 800g，XBA-303L 12g(1.5%) or XBA-303S 4g(0.5%)，fresh water，defoamer 1.2g (0.15%). Slurry density: 1.90±0.02g/cm3（adjusted by adding fresh water）。 | ||
Packaging and Storage
Packaging: XBA-303L is packed with 25kg barrel, XBA-303S is packed with 25kg bag, or according to user requirements.
Storage: The packed products should be saved in a dry and ventilated place, avoid rain, moisture, exposure and heat.
Product detail pictures:
Related Product Guide:
Formation water reduction technology proves successful in the field | Organic Chemicals Additives
Iran Oil Show 2024, Shenyang Taige Oil Equipment will attend
As for aggressive rates, we believe that you will be searching far and wide for anything that can beat us. We can easily state with absolute certainty that for such good quality at such charges we are the lowest around for Manufacturer for Thermal Shock Test - Oil Well Cement Dispersant – Taige, The product will supply to all over the world, such as: Albania , Macedonia , Serbia , Our products are mainly exported to Southeast Asia, the Middle East, North America and Europe. Our quality is surely guaranteed. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
By Martha
from Luxemburg
- 2015.09.29 17:23
After the signing of the contract, we received satisfactory goods in a short term, this is a commendable manufacturer.
By Lindsay
from Milan
- 2016.08.18 11:04
