Manufactur standard Uv Curing Chamber - Fluid Loss Control Medium-high Temperature Anti-saline – Taige
Manufactur standard Uv Curing Chamber - Fluid Loss Control Medium-high Temperature Anti-saline – Taige Detail:
Medium-high temperature anti-saline fluid loss agent XBA-201
Introduction
XBA-201 has two types：XBA-201L (liquid ) and XBA-201S (solid);
XBA-201 is a polymer product with AMPS and AM as monomers.
XBA-201’s applicable temperature is 30~120℃(BHCT).
XBA-201 is not retarded and benefited to cement strength development.
XBA-201 slurry system is stable and has good compatibility.
XBA-201 is applicable to semi-saturated brine.
XBA-201L only can be used through wet mixing.
XBA-201S could be used through wet or dry mixing.
XBA-201’s dosage need to be adjusted according to temperature, salinity and cementing requirements.
Basic performance
|
Product |
Appearance |
Dosage |
|
|
Freshwater system |
Brine system |
||
|
XBA-201L |
Colorless or light yellow liquid |
3~6% |
4~8% |
|
XBA-201S |
White or light gray powder |
0.8~3.0% |
1.0~3.0% |
Slurry performance
|
Item |
Experimental condition |
Technical indicator |
|
|
Fluid loss, mL |
Freshwater system |
80℃，6.9MPa |
≤50 |
|
Brine system |
120℃，6.9MPa |
≤150 |
|
|
Others |
Initial consistency, Bc |
80℃，46.5MPa，45min |
≤30 |
|
40-100Bc thickening transition time, min |
≤40 |
||
|
Thickening time, min |
≥70 |
||
|
Free fluid, % |
80℃，0.1MPa |
≤1.4 |
|
|
24h compressive strength, MPa |
102℃，20.7MPa |
≥14 |
|
|
Slurry composition |
Fresh water system：API class G(HSR) 800g , fresh water, XBA-201L 32g(4%) or XBA-201S 12g(1.5%), defoamer 1.2g（0.15%）; Slurry density: 1.90±0.02g/cm3(adjusted by adding water). | ||
Packaging and Storage
Packaging: XBA-201L is packed with 25kg barrel, XBA-201S is packed with 25kg bag, or according to user requirements.
Storage: The packed products should be saved in a dry and ventilated place, avoid rain, moisture, exposure and heat.
Product detail pictures:
Related Product Guide:
NASDAQ:CTIB | Organic Chemicals Additives
Arup and CLS Architetti 3D printing concrete house for Milan Design Week | Oil Field Cementing Additives
All we do is often involved with our tenet " Purchaser to start with, Rely on initially, devoting over the food stuff packaging and environmental defense for Manufactur standard Uv Curing Chamber - Fluid Loss Control Medium-high Temperature Anti-saline – Taige, The product will supply to all over the world, such as: Italy , Irish , Netherlands , Qualified R&D engineer might be there for your consultation service and we will try our best to meet your requirements. So you should feel free to contact us for inquiries. You'll be able to send us emails or call us for small business. Also you are able to come to our business by yourself to get further knowing of us. And we are going to surely present you with the best quotation and after-sale service. We're ready to build stable and friendly relations with our merchants. To achieve mutual success, we'll make our best efforts to build a solid co-operation and transparent communication work with our companions. Above all, we're here to welcome your inquiries for any of our merchandise and service.
By Chloe
from Chile
- 2015.02.08 16:45
We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
By Caroline
from Munich
- 2016.08.16 13:39
