Low price for High Quality Hec Chemical - Retarder Medium-low Temperature – Taige
Low price for High Quality Hec Chemical - Retarder Medium-low Temperature – Taige Detail:
Medium-low temperature retarder XBA-103L
Introduction
XBA-103L is a medium-low temperature retarder.
XBA-103L’s applicable temperature is 30~90℃(BHCT).
XBA-103L is applicable to brine system.
XBA-103L’s recommended dosage is 0.2~3.0%(BWOC).
XBA-103L is liquid and used through wet mixing.
XBA-103L’s dosage is adjustable according to cementing requirements.
Basic performance
|
Product |
Appearance |
Dosage(BWOC) |
|
XBA-207L |
colorless or light red liquid |
0.2~3.0% |
Slurry performance
|
Item |
Experimental condition |
Technical indicator |
|
|
Thickening time，min |
80℃，46.5MPa，45min |
≥130 |
|
|
Initial consistency, Bc |
≤30 |
||
|
40-100Bc thickening transition time, min |
≤40 |
||
|
Free fluid, % |
80℃，0.01MPa |
≤1.4 |
|
|
24h compressive strength, MPa |
102℃，21MPa |
≥14 |
|
|
Slurry composition |
API class G (HSR)800g，fresh water，XBA-103L 4g(0.5%)，defoamer 1.2g（0.15%）；Slurry density: 1.90±0.02g/cm3(adjusted by adding fresh water). | ||
|
Note |
The thickening time is adjustable as the different dosage of XBA-103L. | ||
Packaging and Storage
Packaging: XBA-103L is packed with 25kg barrel, or according to user requirements.
Storage: The packed products should be saved in a cool and ventilated place, avoid exposure and heat.
Product detail pictures:
Related Product Guide:
Mixing and Dust Reduction in a Horizontal Plow Mixer | Oil Field Cementing Additives
The largest organ in the body may have just been discovered â and it could reshape our understanding of human anatomy | Stirred Fluid Loss Cell
We have now probably the most innovative production equipment, experienced and qualified engineers and workers, regarded high quality control systems and also a friendly expert income team pre/after-sales support for Low price for High Quality Hec Chemical - Retarder Medium-low Temperature – Taige, The product will supply to all over the world, such as: Sri Lanka , Melbourne , Slovenia , All these products are manufactured in our factory located in China. So we can guarantee our quality seriously and availably. Within these four years we sell not only our products but also our service to clients throughout the world.
By Lorraine
from Lyon
- 2015.09.29 17:23
Reasonable price, good attitude of consultation, finally we achieve a win-win situation,a happy cooperation!
By Brook
from Puerto Rico
- 2015.09.21 11:44
