Low MOQ for Mud Chemical Cmc - Medium-low temperature Accelerator – Taige
Low MOQ for Mud Chemical Cmc - Medium-low temperature Accelerator – Taige Detail:
Medium-low temperature Accelerator XBA-402S
Introduction
XBA-402S is an accelerator and benefited to cement strength development
XBA-402S can effectively shorten the thickening time of cement slurry.
XBA-402S can increase set cement’s early strength and shorten WOC(wait of cement) effectively.
XBA-402S could be used through wet or dry mixing.
Basic performance
|
Product |
Appearance |
Dosage(BWOC) |
|
XBA-402S |
Gray or off-white powder |
2~6% |
Slurry performance
|
Item |
Experimental condition |
Technical indicator |
|
|
Initial consistency, Bc |
32℃，8.3MPa，17min |
≤30 |
|
|
Rate of thickening time (Ratio of additive added and non-added) |
≤0.5 |
||
|
6h compressive strength，MPa |
39℃，0.1MPa |
≥4.0 |
|
|
Rate of 24h compressive strength (Ratio of additive added and non-added) |
≥1.0 |
||
|
Slurry composition |
API class G(HSR) 800g，XBA-402S 24g(3%)，fresh water，defoamer 1.2g (0.15%). Slurry density: 1.90±0.02g/cm3（adjusted by adding fresh water）。 | ||
Packaging and Storage
Packaging: XBA-402S is packed with 25kg bag, or according to user requirements.
Storage: The packed products should be saved in a dry and ventilated place, avoid rain, moisture, exposure and heat.
Product detail pictures:
Related Product Guide:
Arup and CLS Architetti 3D printing concrete house for Milan Design Week | Oil Field Cementing Additives
Succeed in the Pre-qualified vendor of ADNOC( Abu Dhabi National Oil Company)
By using a full scientific excellent administration method, great quality and fantastic religion, we get good reputation and occupied this discipline for Low MOQ for Mud Chemical Cmc - Medium-low temperature Accelerator – Taige, The product will supply to all over the world, such as: Macedonia , Chile , Turkey , The quality of our products is equal to OEM's quality, because our core parts are the same with OEM supplier. The above products have passed professional certification, and we not only can produce OEM-standard products but we also accept Customized Products order.
By Hedda
from USA
- 2016.09.28 18:29
In China, we have many partners, this company is the most satisfying to us, reliable quality and good credit, it is worth appreciation.
By Giselle
from Norway
- 2016.09.22 11:32
