Hot Selling for Microfiltration Equipment - Retarder Medium-low Temperature – Taige
Hot Selling for Microfiltration Equipment - Retarder Medium-low Temperature – Taige Detail:
Medium-low temperature retarder XBA-103L
Introduction
XBA-103L is a medium-low temperature retarder.
XBA-103L’s applicable temperature is 30~90℃(BHCT).
XBA-103L is applicable to brine system.
XBA-103L’s recommended dosage is 0.2~3.0%(BWOC).
XBA-103L is liquid and used through wet mixing.
XBA-103L’s dosage is adjustable according to cementing requirements.
Basic performance
|
Product |
Appearance |
Dosage(BWOC) |
|
XBA-207L |
colorless or light red liquid |
0.2~3.0% |
Slurry performance
|
Item |
Experimental condition |
Technical indicator |
|
|
Thickening time，min |
80℃，46.5MPa，45min |
≥130 |
|
|
Initial consistency, Bc |
≤30 |
||
|
40-100Bc thickening transition time, min |
≤40 |
||
|
Free fluid, % |
80℃，0.01MPa |
≤1.4 |
|
|
24h compressive strength, MPa |
102℃，21MPa |
≥14 |
|
|
Slurry composition |
API class G (HSR)800g，fresh water，XBA-103L 4g(0.5%)，defoamer 1.2g（0.15%）；Slurry density: 1.90±0.02g/cm3(adjusted by adding fresh water). | ||
|
Note |
The thickening time is adjustable as the different dosage of XBA-103L. | ||
Packaging and Storage
Packaging: XBA-103L is packed with 25kg barrel, or according to user requirements.
Storage: The packed products should be saved in a cool and ventilated place, avoid exposure and heat.
Product detail pictures:
Related Product Guide:
Shenyang Taige’s Product Played a Part in Shengli Oilfield’s Projects
chemicals used in food and food packaging linked to negative health effects | Concrete Retardant Additives
The pretty loaded projects management experiences and one to a person support model make the high importance of business enterprise communication and our easy understanding of your expectations for Hot Selling for Microfiltration Equipment - Retarder Medium-low Temperature – Taige, The product will supply to all over the world, such as: French , Victoria , Moldova , We can give our clients absolute advantages in product quality and cost control, and we have full range of molds from up to one hundred of factories. As product updating fast, we succeed in developing many high quality products for our clients and get high reputation.
By Olivia
from Plymouth
- 2016.08.16 13:39
It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
By Eric
from Bolivia
- 2016.08.21 14:13
