Hot Selling for G80s) – Fluid Loss Additive - Oil Well Cement Dispersant – Taige
Hot Selling for G80s) – Fluid Loss Additive - Oil Well Cement Dispersant – Taige Detail:
Oil well cement dispersant XBA-303
Introduction
XBA-303 has two types:XBA-303L (liquid ) and XBA-303S (solid);
XBA-303 could significantly reduce consistency,improve liquidity and rheological behavior of cement slurry.
XBA-303 has wide range of applicable temperature to meet the needs of high, medium and low temperature cementing requirements;
XBA-303 is resistant to salt and applicable to saturated brine.
XBA-303L only can be used through wet mixing.
XBA-303S could be used through wet or dry mixing.
XBA-303’s dosage need to be adjusted according to the performance requirements of cement slurry.
Basic performance
|
Product |
Appearance |
Dosage(BWOC) |
|
XBA-303L |
red liquid |
0.5~4% |
|
XBA-303S |
red powder |
0.2~2% |
Slurry performance
|
Item |
Experimental condition |
Technical indicator |
|
|
Rate of thickening time (Ratio of additive added and non-added) |
85℃,70.3MPa,44min |
1.0~2.0 |
|
|
Thickening linear |
正常 |
||
|
Rate of 24h compressive strength (Ratio of additive added and non-added) |
110℃,20.7MPa |
≥0.80 |
|
|
Rheological property |
rheological index n |
85℃,0.01MPa |
≥0.50 |
|
|
consistentcy coefficient k,Pa·sn |
≤0.70 |
|
|
Slurry composition |
API class G(HSR) 800g,XBA-303L 12g(1.5%) or XBA-303S 4g(0.5%),fresh water,defoamer 1.2g (0.15%). Slurry density: 1.90±0.02g/cm3(adjusted by adding fresh water)。 | ||
Packaging and Storage
Packaging: XBA-303L is packed with 25kg barrel, XBA-303S is packed with 25kg bag, or according to user requirements.
Storage: The packed products should be saved in a dry and ventilated place, avoid rain, moisture, exposure and heat.
Product detail pictures:


Related Product Guide:
Chemicals in Food May Harm Children, Pediatricians’ Group Says | Oil Field Cementing Additives
Arup and CLS Architetti 3D printing concrete house for Milan Design Week | Oil Field Cementing Additives
Our company sticks to the principle of "Quality is the life of the company, and reputation is the soul of it" for Hot Selling for G80s) – Fluid Loss Additive - Oil Well Cement Dispersant – Taige, The product will supply to all over the world, such as: Congo , Algeria , Zurich , Till now, the goods list has been updated regularly and attracted clients from around the globe. Detailed facts is often obtained in our web-site and you'll be served with premium quality consultant service by our after-sale group. They are going to help you get comprehensive acknowledge about our products and make a satisfied negotiation. Company go to to our factory in Brazil is also welcome at any time. Hope to obtain your inquiries for any pleased co-operation.
After the signing of the contract, we received satisfactory goods in a short term, this is a commendable manufacturer.




