Hot Sale for Paint Disperser - Fluid Loss Control Medium-low Temperature – Taige

Short Description:

Medium-low temperature fluid loss agent XBA-203SIntroduction XBA-203S is a compound power fluid loss agent. XBA-203S’ applicable temperature is 0~90℃(BHCT). XBA-203S is not retarded and benefited to cement strength development. XBA-203S isn’t resistant to salt, not suitable for brine system. XBA-203S has a certain effect in viscosity and some dispersant may be added in cement slurry. XBA-203S only can be used through dry mixing.Basic performanceProductAppearanceDosag...

Send email to us Download as PDF

Product Detail

Product Tags

Feedback (2)

We always believe that one's character decides products' quality, the details decides products' high-quality ,together with the REALISTIC,EFFICIENT AND INNOVATIVE crew spirit for Thickening Time Test Data , Cement Test Apparatus , Test Cementing Apparatus , Seeing believes! We sincerely welcome the new clients abroad to build organization associations and also hope to consolidate the associations while using the long-established prospects.

Hot Sale for Paint Disperser - Fluid Loss Control Medium-low Temperature – Taige Detail:

Medium-low temperature fluid loss agent XBA-203S

Introduction

XBA-203S is a compound power fluid loss agent.

XBA-203S’ applicable temperature is 0~90℃(BHCT).

XBA-203S is not retarded and benefited to cement strength development.

XBA-203S isn’t resistant to salt, not suitable for brine system.

XBA-203S has a certain effect in viscosity and some dispersant may be added in cement slurry.

XBA-203S only can be used through dry mixing.

Basic performance

Product	Appearance	Dosage
		Freshwater system	Brine system
XBA-203S	Gray powder	0.8~2.0%	Inapplicable

Slurry performance

Item		Experimental condition	Technical indicator
Fluid loss, mL		80℃，6.9MPa	≤50
Others	Initial consistency, Bc	80℃，46.5MPa，45min	≤30
	40-100Bc thickening transition time, min		≤40
	Thickening time, min		≥70
	Free fluid, %	80℃，0.1MPa	≤1.4
	24h compressive strength, MPa	102℃，20.7MPa	≥14
Slurry composition	API class G(HSR) 800g , fresh water , XBA-202S 12g(1.5%), XBA-101L 8g(1.0%), defoamer 1.2g（0.15%）.Slurry density: 1.90±0.02g/cm3(adjusted by adding fresh water).

Packaging and Storage

Packaging: XBA-203S is packed with 25kg bag, or according to user requirements.

Storage: The packed products should be saved in a dry and ventilated place, avoid rain, moisture, exposure and heat.

Product detail pictures:

Just about every member from our large efficiency income crew values customers' wants and enterprise communication for Hot Sale for Paint Disperser - Fluid Loss Control Medium-low Temperature – Taige, The product will supply to all over the world, such as: Cannes , Portugal , Palestine , Many products fully conform to the most rigorous of international guidelines and with our first-rate delivery service you will have them delivered at any time and in any place. And because Kayo deals in the entire spectrum of protective equipment, our customers don't need to waste time shopping around.

Drilling Fluid Rhemeter