Hot sale Factory Vacuum Curring Oven - Compound accelerator – Taige
Hot sale Factory Vacuum Curring Oven - Compound accelerator – Taige Detail:
Compound Accelerator XBA-403S
Introduction
XBA-403S is a compound power accelerator.
XBA-403S is applicable for medium-low temperature system.
XBA-403S can effectively shorten the thickening time of cement slurry.
XBA-403S can increase set cement’s early strength and shorten WOC(wait of cement) effectively.
XBA-403S could be used through wet or dry mixing.
Basic performance
Product |
Appearance |
Dosage(BWOC) |
XBA-403S |
Gray powder |
2~6% |
Slurry performance
Item |
Experimental condition |
Technical indicator |
|
Initial consistency, Bc |
32℃,8.3MPa,17min |
≤30 |
|
Rate of thickening time (Ratio of additive added and non-added) |
≤0.5 |
||
6h compressive strength,MPa |
39℃,0.1MPa |
≥4.0 |
|
Rate of 24h compressive strength (Ratio of additive added and non-added) |
≥1.0 |
||
Slurry composition |
API class G(HSR) 800g,XBA-403S 32g(4%),fresh water,defoamer 1.2g (0.15%). Slurry density: 1.90±0.02g/cm3(adjusted by adding fresh water)。 |
Packaging and Storage
Packaging: XBA-403S is packed with 25kg bag, or according to user requirements.
Storage: The packed products should be saved in a dry and ventilated place, avoid rain, moisture, exposure and heat.
Product detail pictures:
Related Product Guide:
Head-To-Head Analysis: KLX Energy Services (KLXE) vs. Halliburton (HAL) | Concrete Retardant Additives
Stretchy solar cells a step closer: Engineers give organic photovoltaics new properties — ScienceDaily | Oil Field Cementing Additives
owing to excellent assistance, a variety of high quality products and solutions, aggressive costs and efficient delivery, we take pleasure in an excellent popularity amongst our customers. We are an energetic business with wide market for Hot sale Factory Vacuum Curring Oven - Compound accelerator – Taige, The product will supply to all over the world, such as: Czech republic , Paraguay , Philadelphia , Qualified R&D engineer might be there for your consultation service and we will try our best to meet your requirements. So you should feel free to contact us for inquiries. You'll be able to send us emails or call us for small business. Also you are able to come to our business by yourself to get further knowing of us. And we are going to surely present you with the best quotation and after-sale service. We're ready to build stable and friendly relations with our merchants. To achieve mutual success, we'll make our best efforts to build a solid co-operation and transparent communication work with our companions. Above all, we're here to welcome your inquiries for any of our merchandise and service.
By Louis from Brunei - 2015.06.18 19:26
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Renee from Amsterdam - 2015.09.21 11:44