High Quality for Tyre Retreading Machineries - HTHP Stirred Fluid Loss – Taige
High Quality for Tyre Retreading Machineries - HTHP Stirred Fluid Loss – Taige Detail:
HTHP Stirred Fluid Loss Tester/
Introduction/
HTHP Stirred Fluid Loss Tester is designed according to API Spec 10, is more suitable for measuring fluid loss property for a mixer unit in it.
Configurations/
- Control Assembly consists of control circuit, temperature controller, thermocouple for collecting temperature and a cooling jacket for cooling slurry cylinder。
500*650*890mm/ (64kg)
- Slurry cup assembly consists of stainless slurry cup resisting HTHP for holding sample, and mixing slurry cylinder can mix slurry at the speed of HTHP.
Specifications
Cylinder Regulator Pressure/：0—14MPa
Filter Regulator Pressure/: 0—1.1MPa
Programmable Temperature Controller/: 0—232℃
Input Voltage/: 220V
Heater Power/: 0.7KW
Environment Temperature/: 16~32℃
Maximum Pressure of Cooling water/: 0.2-0.6MPa
Maximum Cylinder Pressure/: 13.8MPa
Slurry Volume/: 275ml
Cylinder Volume/: 500ml
Filter Press Cylinder Volume/: 100ml
Paddle Rotational Speed/: 150rpm
Marked Measuring Cylinder Volume/: 50ml
Product detail pictures:
Related Product Guide:
JPT Pulsed-Neutron Comparison of Open- and Casedhole Wells: An Alaskan Case Study | Cement Liquid Additives
Head-To-Head Analysis: KLX Energy Services (KLXE) vs. Halliburton (HAL) | Concrete Retardant Additives
Assume full responsibility to meet all demands of our clients; achieve continuous advancements by promoting the growth of our clients; become the final permanent cooperative partner of clients and maximize the interests of clients for High Quality for Tyre Retreading Machineries - HTHP Stirred Fluid Loss – Taige, The product will supply to all over the world, such as: Hungary , Swansea , Danish , With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and good service for domestic and international customers.
By Mignon
from Slovak Republic
- 2015.12.25 12:43
In China, we have many partners, this company is the most satisfying to us, reliable quality and good credit, it is worth appreciation.
By Myrna
from Zambia
- 2015.02.04 14:13
