High Quality for Cheap Electric Motors - Ultrasonic Static Gel Strength – Taige
High Quality for Cheap Electric Motors - Ultrasonic Static Gel Strength – Taige Detail:
Ultrasonic Static Gel Strength Analyzer/
Introduction
Ultrasonic Static Gel Strength Analyze is designed to detect the development of the compressive strength of cement samples cured at a simulated temperature and pressure. Through measuring the changes in speed of ultrasonic wave signals that pass through cement samples during their hardening, the instrument can determine the compressive strength of cement. With the increase in the compressive strength of cement, the transmit time of the ultrasonic wave signals that pass through cement samples will decrease gradually, thus we can work out the corresponding compressive strength of cement.
Benefits/
Non-destructive method determining relative compressive strength.
A single sample is used to gather any desired number of data points for specific test conditions.，
Embedded controller for temperature control.
Display of current strength, transit time and temperature measurements on each cell.，
Acquisition software provided for PC based database of test results.
Pressure control maintained with relief valve.
Date retained during power outages.
Heating /cooling jacket.
Multiple user selectable alarm settings.
204℃ maximum curing temperature 204℃
138MPa maximum curing pressure 138MPa
Model: TG-5265
Input voltages : 220V 550*600*550 mm (56kg)
Compressive air: 0.5-0.8MPa
Cooling water: 0.2-0.6MPa
Operating temperature: 0-50℃
Product detail pictures:
Related Product Guide:
9 Best Organic Pads | Concrete Retardant Additives
NASDAQ:CTIB | Organic Chemicals Additives
Our well-equipped facilities and exceptional good quality manage throughout all stages of production enables us to guarantee total shopper satisfaction for High Quality for Cheap Electric Motors - Ultrasonic Static Gel Strength – Taige, The product will supply to all over the world, such as: Angola , Slovak Republic , Philippines , We set "be a creditable practitioner to achieve the continuous development and innovation" as our motto. We would like to share our experience with friends at home and abroad, as a way to create a bigger cake with our joint efforts. We have several experienced R & D persons and we welcome OEM orders.
By Marcia
from Colombia
- 2015.09.23 17:37
Speaking of this cooperation with the Chinese manufacturer, I just want to say"well dodne", we are very satisfied.
By Phoenix
from Iraq
- 2015.10.01 14:14
