Factory wholesale Magnetic Flow Meter Pcb - Compound accelerator – Taige
Factory wholesale Magnetic Flow Meter Pcb - Compound accelerator – Taige Detail:
Compound Accelerator XBA-403S
Introduction
XBA-403S is a compound power accelerator.
XBA-403S is applicable for medium-low temperature system.
XBA-403S can effectively shorten the thickening time of cement slurry.
XBA-403S can increase set cement’s early strength and shorten WOC(wait of cement) effectively.
XBA-403S could be used through wet or dry mixing.
Basic performance
|
Product |
Appearance |
Dosage(BWOC) |
|
XBA-403S |
Gray powder |
2~6% |
Slurry performance
|
Item |
Experimental condition |
Technical indicator |
|
|
Initial consistency, Bc |
32℃，8.3MPa，17min |
≤30 |
|
|
Rate of thickening time (Ratio of additive added and non-added) |
≤0.5 |
||
|
6h compressive strength，MPa |
39℃，0.1MPa |
≥4.0 |
|
|
Rate of 24h compressive strength (Ratio of additive added and non-added) |
≥1.0 |
||
|
Slurry composition |
API class G(HSR) 800g，XBA-403S 32g(4%)，fresh water，defoamer 1.2g (0.15%). Slurry density: 1.90±0.02g/cm3（adjusted by adding fresh water）。 | ||
Packaging and Storage
Packaging: XBA-403S is packed with 25kg bag, or according to user requirements.
Storage: The packed products should be saved in a dry and ventilated place, avoid rain, moisture, exposure and heat.
Product detail pictures:
Related Product Guide:
First Taige OTC exhibition comes to a sucessful close
Upgrading traditional liquid electrolyte via in situ gelation for future lithium metal batteries | Stirred Fluid Loss Cell
The shopper satisfaction is our primary focus on. We uphold a consistent level of professionalism, quality, credibility and repair for Factory wholesale Magnetic Flow Meter Pcb - Compound accelerator – Taige, The product will supply to all over the world, such as: Guatemala , Pakistan , Luxembourg , Our products and solutions are sold to the Middle East, Southeast Asia, Africa, Europe, America and other regions, and are favorably appraised by clients. To benefit from our strong OEM/ODM capabilities and considerate services, be sure to contact us today. We will sincerely create and share success with all clients.
By Evelyn
from Turin
- 2016.11.01 17:04
Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.
By Olivia
from Paris
- 2016.05.21 12:31
