Factory supplied Regeneration Cream - Fluid Loss Control Medium-low Temperature – Taige
Factory supplied Regeneration Cream - Fluid Loss Control Medium-low Temperature – Taige Detail:
Medium-low temperature fluid loss agent XBA-203S
Introduction
XBA-203S is a compound power fluid loss agent.
XBA-203S’ applicable temperature is 0~90℃(BHCT).
XBA-203S is not retarded and benefited to cement strength development.
XBA-203S isn’t resistant to salt, not suitable for brine system.
XBA-203S has a certain effect in viscosity and some dispersant may be added in cement slurry.
XBA-203S only can be used through dry mixing.
Basic performance
|
Product |
Appearance |
Dosage |
|
|
Freshwater system |
Brine system |
||
|
XBA-203S |
Gray powder |
0.8~2.0% |
Inapplicable |
Slurry performance
|
Item |
Experimental condition |
Technical indicator |
|
|
Fluid loss, mL |
80℃，6.9MPa |
≤50 |
|
|
Others |
Initial consistency, Bc |
80℃，46.5MPa，45min |
≤30 |
|
40-100Bc thickening transition time, min |
≤40 |
||
|
Thickening time, min |
≥70 |
||
|
Free fluid, % |
80℃，0.1MPa |
≤1.4 |
|
|
24h compressive strength, MPa |
102℃，20.7MPa |
≥14 |
|
|
Slurry composition |
API class G(HSR) 800g , fresh water , XBA-202S 12g(1.5%), XBA-101L 8g(1.0%), defoamer 1.2g（0.15%）.Slurry density: 1.90±0.02g/cm3(adjusted by adding fresh water). | ||
Packaging and Storage
Packaging: XBA-203S is packed with 25kg bag, or according to user requirements.
Storage: The packed products should be saved in a dry and ventilated place, avoid rain, moisture, exposure and heat.
Product detail pictures:
Related Product Guide:
HTHS High Density Cementing System
Expanded Perlite Market | Stirred Fluid Loss Cell
Our solutions are widely recognized and trusted by consumers and will meet up with constantly developing financial and social requires for Factory supplied Regeneration Cream - Fluid Loss Control Medium-low Temperature – Taige, The product will supply to all over the world, such as: Swiss , Montreal , Swansea , We've been always creating new technology to streamline the production, and give products with competitive prices and high quality! Customer satisfaction is our priority! You can let us know your idea to develop unique design for your own model to prevent too much similar parts in the market! We are going to present our best service to satisfy all your needs! Remember to contact us right away!
By Antonia
from Amman - 2016.09.28 18:29
The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
By Roxanne
from Boston
- 2016.07.07 13:00
