Factory For Fluid Loss Additives - Fluid Loss Control Medium-low Temperature – Taige

Short Description:

Medium-low temperature fluid loss agent XBA-203SIntroduction XBA-203S is a compound power fluid loss agent. XBA-203S’ applicable temperature is 0~90℃(BHCT). XBA-203S is not retarded and benefited to cement strength development. XBA-203S isn’t resistant to salt, not suitable for brine system. XBA-203S has a certain effect in viscosity and some dispersant may be added in cement slurry. XBA-203S only can be used through dry mixing.Basic performanceProductAppearanceDosag...

Send email to us Download as PDF

Product Detail

Product Tags

Feedback (2)

Our business puts emphasis over the administration, the introduction of talented staff, plus the construction of employees building, striving hard to boost the standard and liability consciousness of staff members. Our corporation successfully attained IS9001 Certification and European CE Certification of Chemicals Additives , Rotational Viscometer , Fluid Loss Instrument , Excellent quality, competitive prices, prompt delivery and dependable service are guaranteed Kindly let us know your quantity requirement under each size category so that we can inform you accordingly.

Factory For Fluid Loss Additives - Fluid Loss Control Medium-low Temperature – Taige Detail:

Medium-low temperature fluid loss agent XBA-203S

Introduction

XBA-203S is a compound power fluid loss agent.

XBA-203S’ applicable temperature is 0~90℃(BHCT).

XBA-203S is not retarded and benefited to cement strength development.

XBA-203S isn’t resistant to salt, not suitable for brine system.

XBA-203S has a certain effect in viscosity and some dispersant may be added in cement slurry.

XBA-203S only can be used through dry mixing.

Basic performance

Product	Appearance	Dosage
		Freshwater system	Brine system
XBA-203S	Gray powder	0.8~2.0%	Inapplicable

Slurry performance

Item		Experimental condition	Technical indicator
Fluid loss, mL		80℃，6.9MPa	≤50
Others	Initial consistency, Bc	80℃，46.5MPa，45min	≤30
	40-100Bc thickening transition time, min		≤40
	Thickening time, min		≥70
	Free fluid, %	80℃，0.1MPa	≤1.4
	24h compressive strength, MPa	102℃，20.7MPa	≥14
Slurry composition	API class G(HSR) 800g , fresh water , XBA-202S 12g(1.5%), XBA-101L 8g(1.0%), defoamer 1.2g（0.15%）.Slurry density: 1.90±0.02g/cm3(adjusted by adding fresh water).

Packaging and Storage

Packaging: XBA-203S is packed with 25kg bag, or according to user requirements.

Storage: The packed products should be saved in a dry and ventilated place, avoid rain, moisture, exposure and heat.

Product detail pictures:

With sophisticated technologies and facilities, strict top quality handle, reasonable value, exceptional support and close co-operation with clients, we are devoted to furnishing the ideal worth for our clients for Factory For Fluid Loss Additives - Fluid Loss Control Medium-low Temperature – Taige, The product will supply to all over the world, such as: Riyadh , Bahrain , Macedonia , Our factory is equipped with complete facility in 10000 square meters, which makes us be able to satisfy the producing and sales for most auto part solutions. Our advantage is full category, high quality and competitive price! Based on that, our products win a high admiration both at home and abroad.

Adhesion Coefficient Tester Wholesaler Quotes/PriceList