Factory best selling Flat Die Rheometer - Fluid Loss Control High Temperature Anti-saline – Taige
Factory best selling Flat Die Rheometer - Fluid Loss Control High Temperature Anti-saline – Taige Detail:
High temperature fluid loss agent XBA-203L
Introduction
XBA-203L is a high temperature fluid loss agent.
XBA-203L’s applicable temperature is 60~150℃(BHCT).
XBA-203L is resistant to salt and applicable to saturated brine.
XBA-203L has a retarding effect and is suitable for high temperature and deep well cementing.
XBA-203L slurry system is stable and has good compatibility.
XBA-203L is liquid and only can be used through wet mixing.
XBA-203L’s dosage need to be adjusted according to temperature, salinity and cementing requirements.
Basic performance
|
Product |
Appearance |
Dosage(BWOC) |
|
|
Freshwater system |
Brine system |
||
|
XBA-203L |
colorless or light yellow liquid |
3~6% |
4~8% |
Slurry performance
|
Item |
Experimental condition |
Technical indicator |
|
|
Fluid loss, mL |
Freshwater system |
120℃，6.9MPa |
≤50 |
|
Brine system |
≤150 |
||
|
Others |
Initial consistency, Bc |
120℃, 73.9MPa,61min |
≤30 |
|
40-100Bc thickening transition time, min |
≤40 |
||
|
Thickening time, min |
≥120 |
||
|
Free fluid, % |
80℃，0.1MPa |
≤1.4 |
|
|
24h compressive strength, MPa |
144℃，20.7MPa |
≥14 |
|
|
Slurry composition |
Fresh water system：API class G(HSR) 600g , silica flour 210g(140-200 mesh, 35%), fresh water, XBA-201L 30g(5%), XBA-105L 6g(1%), defoamer 1.2g(0.2%). Slurry density: 1.90±0.02g/cm3(adjusted by adding fresh water). Brine system：API class G(HSR) 600g, silica flour 210g(140-200 mesh, 35%), 18% brine , XBA-203L 36g(6%), XBA-105L 6 g(1%), defoamer 1.2g(0.2%). Slurry density: 1.90±0.02g/cm3(adjusted by adding 36% brine). |
||
Packaging and Storage
Packaging: XBA-203L is packed with 25kg barrel, or according to user requirements.
Storage: The packed products should be saved in a cool and ventilated place, avoid exposure and heat.
Product detail pictures:
Related Product Guide:
Coaches, players have new weapons in old battle against heat | Stirred Fluid Loss Cell
OTCMKTS:KURRY | Cement Liquid Additives
We goal to see good quality disfigurement within the manufacturing and provide the most effective support to domestic and overseas shoppers wholeheartedly for Factory best selling Flat Die Rheometer - Fluid Loss Control High Temperature Anti-saline – Taige, The product will supply to all over the world, such as: Jordan , Indonesia , Ukraine , In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Victor
from Mauritius
- 2015.09.29 13:24
This is a very professional and honest Chinese supplier, from now on we fell in love with the Chinese manufacturing.
By Bertha
from Riyadh
- 2015.09.16 11:31
