Cheapest Factory Anti Friction Oil Additive - Fluid Loss Control Medium-high Temperature Anti-saline – Taige
Cheapest Factory Anti Friction Oil Additive - Fluid Loss Control Medium-high Temperature Anti-saline – Taige Detail:
Medium-high temperature anti-saline fluid loss agent XBA-201
Introduction
XBA-201 has two types：XBA-201L (liquid ) and XBA-201S (solid);
XBA-201 is a polymer product with AMPS and AM as monomers.
XBA-201’s applicable temperature is 30~120℃(BHCT).
XBA-201 is not retarded and benefited to cement strength development.
XBA-201 slurry system is stable and has good compatibility.
XBA-201 is applicable to semi-saturated brine.
XBA-201L only can be used through wet mixing.
XBA-201S could be used through wet or dry mixing.
XBA-201’s dosage need to be adjusted according to temperature, salinity and cementing requirements.
Basic performance
|
Product |
Appearance |
Dosage |
|
|
Freshwater system |
Brine system |
||
|
XBA-201L |
Colorless or light yellow liquid |
3~6% |
4~8% |
|
XBA-201S |
White or light gray powder |
0.8~3.0% |
1.0~3.0% |
Slurry performance
|
Item |
Experimental condition |
Technical indicator |
|
|
Fluid loss, mL |
Freshwater system |
80℃，6.9MPa |
≤50 |
|
Brine system |
120℃，6.9MPa |
≤150 |
|
|
Others |
Initial consistency, Bc |
80℃，46.5MPa，45min |
≤30 |
|
40-100Bc thickening transition time, min |
≤40 |
||
|
Thickening time, min |
≥70 |
||
|
Free fluid, % |
80℃，0.1MPa |
≤1.4 |
|
|
24h compressive strength, MPa |
102℃，20.7MPa |
≥14 |
|
|
Slurry composition |
Fresh water system：API class G(HSR) 800g , fresh water, XBA-201L 32g(4%) or XBA-201S 12g(1.5%), defoamer 1.2g（0.15%）; Slurry density: 1.90±0.02g/cm3(adjusted by adding water). | ||
Packaging and Storage
Packaging: XBA-201L is packed with 25kg barrel, XBA-201S is packed with 25kg bag, or according to user requirements.
Storage: The packed products should be saved in a dry and ventilated place, avoid rain, moisture, exposure and heat.
Product detail pictures:
Related Product Guide:
KURARAY CO LTD/ADR (KURRY) & Univar (NYSE:UNVR) Financial Review | Organic Chemicals Additives
CNW | Cement Liquid Additives
We always stick to the principle "Quality First, Prestige Supreme". We are fully committed to providing our clients with competitively priced quality products, prompt delivery and professional service for Cheapest Factory Anti Friction Oil Additive - Fluid Loss Control Medium-high Temperature Anti-saline – Taige, The product will supply to all over the world, such as: Uzbekistan , Indonesia , Adelaide , All these products are manufactured in our factory located in China. So we can guarantee our quality seriously and availably. Within these four years we sell not only our products but also our service to clients throughout the world.
By Janice
from Niger
- 2016.04.08 14:55
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Albert
from India
- 2016.05.02 11:33
