HTHP Fluid Loss Tester
HTHP Static Fluid Loss Tester
Model: TG-71
HTHP Static Fluid Loss Tester, or HTHP Filter Press designed according to API Spec 10, is used to measure fluid loss property in the condition of HTHP. TG-71 is also used to determine the filter press of drilling fluids.
Specifications
- Power: 220V+/-10%, 50Hz
- Heater Power: 1000 W
- Maximum Operating Temperature: 260℃ (500°F)
- Maximum Operating Pressure: 7.1MPa (Max.34MPa optional)
- Cell capacity: 485ml
Configuration s
- Control los ua ke muaj kev tswj Circuit Court, kub xws li (Britain) thiab thermocouple sau kub.
- Slurry khob los ua ke muaj stainless slurry khob tawmtsam HTHP rau cov tuav qauv.
- Double capped cell with Lines and piping systems(N2 pressurized manifold).
- Test cell with cement screens, dual screw cap
- Cell volume: 500 ml.
Features:
- Fluid loss measurement through standard screens or filter paper
- Safer cell design with threaded end caps
- Dual ended cell
- Over temperature safety circuitry
- Over pressure pop off valves
-
Cell: grub screws, double capped
Model: TG-71
Size: 210*300*670mm
Net weight: 26kg